Doorstops

Why use a door stop for internal doors?

A good door stopper prevents damage to walls, skirting boards and door handles when a door swings open too far. In addition, the rubber ring dampens impact noise, so you’re less bothered by slamming or vibrations. With a fixed stop, you can determine exactly where the door stops, which helps extend the lifespan of your door fittings and hinges. In living spaces, this creates a sense of calm and consistency, for example with doors that are frequently opened by draughts or foot traffic. In offices and hospitality environments, a discreet floor stop helps to keep passageways just open without doors banging against walls or furniture. If you opt for a solid stainless steel model with a PVD coating, you’ll also benefit from extra wear resistance and a finish that remains attractive, even with intensive use.

Which door stopper is right for your situation?

Intergriff supplies floor-mounted door stops, ideal for internal doors. This type is low-profile, robust and unobtrusive, and provides a secure stop on the floor. Wall-mounted or skirting board models and magnetic door stops are also available, but are particularly suitable if the floor cannot be drilled or if you wish to keep a door open using a magnet. If you have space on the floor and want the most robust solution, a floor-mounted model is the logical choice.

• Floor-mounted door stop: very stable, fixed stop, suitable for almost any interior door.
• Skirting board or wall-mounted door stop: an alternative if drilling into the floor is not desirable.
• Movable door stop or pocket: for temporary use, less sleek and less secure.

When choosing, pay particular attention to the stop height and diameter, the finish that matches your door fittings, and the exact positioning. Compact sizes such as 25×30 mm or 30×40 mm are strong enough for standard interior doors and look subtle in modern interiors.

Materials and finishes

Intergriff door stops are made from solid stainless steel for maximum stability and durability. The PVD coating provides an extra-hard, corrosion-resistant layer, ensuring the finish remains attractive for a long time. This is ideal for high-traffic areas and spaces where you clean regularly.

• Brushed stainless steel: timeless and universally compatible with modern door fittings.
• Matt gold: a warm, luxurious look, perfect with brass-coloured or gold-tinted fittings.
• Brushed bronze: a distinctive shade that adds tranquillity and depth to the interior.

The rubber ring provides soft cushioning on contact with the door, prevents paint damage and reduces noise. Maintenance is simple: dust regularly and clean with a soft, non-abrasive cloth.

Want to choose based on colour? Opt for black door stoppers for a modern, industrial look, or choose white door stoppers that complement light, minimalist interiors beautifully.

Sizes and fitting position

Intergriff offers compact sizes such as 25×30 mm and 30×40 mm. The correct size depends, amongst other things, on the door width, the weight and the desired stopping distance from the wall. A larger size often means a bit more mass and stability, which is beneficial for heavier interior doors.

Here’s how to determine the correct position:

• Open the door to the desired stopping position and mark a point on the floor where the stop touches the door.
• Check that the door handle, skirting board or mouldings do not come into contact with anything in this position.
• Leave a gap of approximately 5 to 10 cm between the door handle and the wall for extra safety.
• Ideally, position the stop in line with the hinge side for a secure, predictable stop.

If you’re unsure whether to choose 25×30 or 30×40 mm, opt for the larger size if you have a heavier door or a longer hinge side. For lighter interior doors or where you want the stop to be as discreet as possible, 25×30 mm is usually sufficient.

Installation: floor-mounted door stop

Floor mounting offers the most secure fix. Intergriff door stops are supplied with a locking pin for simple, secure installation. The installation method varies depending on your surface.

• Hard surfaces such as concrete or tiles: drill a suitable hole, insert a wall plug if necessary, and secure the stopper according to the instructions. Ensure the rubber can move freely to absorb impact.
• Wooden floor: pre-drill and screw into the joist or a sturdy subfloor. Check the thickness of the floor and use suitable fixing materials.
• Underfloor heating: locate the pipes and avoid drilling in areas with heating pipes. Consult your installer if necessary.

Fit the door at right angles to the direction of travel and, once secured, check that the door opens smoothly right up to the stop, without jamming. Self-adhesive or removable alternatives are handy for temporary use, but do not provide the secure, neat finish of floor mounting.

Style choice: coordinate with your door fittings

Choose a finish that complements your door handles, hinges and rosettes. Matt gold and brushed bronze enhance warm, natural interiors; brushed stainless steel is a safe choice in minimalist and modern settings. Finish your entire floor in the same finish for a harmonious look. Thanks to their compact, ribbed design, Intergriff doorstops stand out for their detail, not their size. If you’re looking for a warm match with gold- or copper-coloured fittings, consider a brass doorstop for a consistent look.

Applications in the home and commercial projects

Floor-mounted door stops are ideal for living rooms, bedrooms, bathrooms and office spaces. They keep doors away from vulnerable walls and glass panels. For external doors or in conditions with extreme wind loads, you’ll usually opt for a special outdoor door stop or door holder. Intergriff specialises in high-quality interior door solutions with a durable finish and a 5-year guarantee.

Comparison at a glance

• Compact
  • Dimensions: 25×30 mm
  • Installation: Floor-mounted, with locking pin
  • Recommended for: Standard interior doors
  • Finishes: Brushed stainless steel, matt gold, brushed bronze
• Extra stable
  • Dimensions: 30 x 40 mm
  • Installation: Floor-mounted, with locking pin
  • Recommended for: Slightly heavier interior doors
  • Finishes: Brushed stainless steel, matt gold, brushed bronze

Frequently asked questions

What types of door stops are there?

Broadly speaking, you can distinguish between floor-mounted, wall- or skirting board-mounted, magnetic stoppers and portable options such as a door stop or sandbag. Intergriff focuses on floor-mounted solutions for interior doors, as this provides the most stable and neat result. If you’re looking for an alternative solution, choose a wall- or skirting board-mounted model if drilling into the floor isn’t possible, or a magnetic stopper if you want to hold the door open.

Where is the best place to fit a door stop?

Position the stop on the floor where the door gently touches the rubber ring in its desired final position. Take into account the door handle, skirting boards and any wall decorations. Guideline: ensure there is sufficient space between the door handle and the wall, and preferably fit it towards the hinge side. Test the door’s movement before drilling the final holes.

How do you secure double doors?

For double interior doors, fit one stop to the floor for each door leaf, so that both sections stop in a controlled and symmetrical manner. If you wish to keep doors open, a door closer with a hold-open function or a magnetic solution is an option. Intergriff supplies fixed floor stops for controlled stopping, not for magnetic locking.

Can I use a door stopper without drilling?

You can avoid drilling by using self-adhesive buffers or movable stoppers, but these are less stable and look less neat. For a durable and professional solution, floor mounting remains the best choice. Intergriff supplies solid stainless steel floor-mounted models with a locking pin for a sturdy, secure fix in the desired position.

What size door stop should I choose?

For most interior doors, 25×30 mm or 30×40 mm are suitable. Choose the compact size for lightweight doors and a subtle look. Opt for 30×40 mm if your door is slightly heavier or if you want extra weight. Determine the position by opening the door to the ideal position and then marking the contact point on the floor.

Is stainless steel with PVD suitable for damp areas?

Yes, the PVD coating is highly wear-resistant and corrosion-resistant, meaning your door stop retains its colour and finish better in daily use, even in places such as the bathroom. Clean with a soft cloth and avoid abrasive cleaners for long-lasting results.